High Flow PLRD Series Water Filter cartridge Water Filter For Water Filtration System

Short Description:

High Flow PLRD Series Filter Cartridges are made from depth fine PP or GF non-woven fabrics.The filter has a big diameter of 6 inch/152mm and no inner core, single open.The inside to outside flow pattern ensure that all the particles will be intercepted at the inside of the filter.The long service life and high flow rate result in low investment and less manpower in many applications.

Send email to us

Product Detail

Product Tags

Product characteristics:
• High filtration area, high flow rate.
• With depth fine non-woven fabrics and scientific design, the filter has a good structure which has high dirt holding capacity, and result in long service life.
• 100% PP material makes the filter cartridge got excellent chemical compatibility. It is suitable for various liquid filtration.

Product specification:
Dimension:		[Removal Rating]: 0.5um,1um,3um,5um,10um,20um,50um,75um,100um
		[Length]:20"(508mm), 40"(1016mm), 60"(1524mm)
		[OD]: Ø 160mm
Material of Constructions:		[Media]: Polypropylene(PP)/Glass Fiber
		[Drain layer]：China Non-Woven Fabric
		[End cap]: Polypropylene(PP)
		[Gasket]: Silicone, EPDM, NBR, Viton
		[Core]: Polypropylene(PP)
Performance:		[Max. Operating temperature]: 80℃
Performance:		[Max. Operating DP]: 4.0Bar@21℃,2.4Bar@80℃.

Order Information
Series Number	Romoval Rating	Length	CORE	MEDIA	SEAL	OD
FWHFPLRD	0.5um=05	20"(508mm)=20	PP=P	PP=P	SILICONE=S	160mm
	1um=1	40"(1016mm)=40		Glass Fiber=G	EPDM=E
	3um=3	60"(1524mm)=60			NBR=N
	5um=5				VITON=V
	10um=10
	20um=20
	50um=50
	75um=75
	100um=100
For Example:	FWHFPLRD-1-20-P-P-S
For Example:	FWHFPLRD-10-40-P-G-S

The large flow water filter element adopts the double-layer structure mode. Its interior is discounted by double-layer polypropylene material. It is divided into two layers of filtration. The inner layer is the final filter layer and the outer layer is the coarse filter layer made of non-woven fabric. Its pore size is slightly different.

The outer layer of the large flow water filter element mainly plays the role of pre filtration. The inner and outer supports are divided into two materials, mainly polypropylene or stainless steel. Its inner layer carries out the final filtration. The large flow filter element is a water filter element that combines pre filtration and final filtration, which is also the guarantee of its filtration effect.

The core of large flow filter element is mainly membrane, and its filter membrane material is mainly polypropylene non-woven fabric. The structure of the large flow filter element is divided into two parts, mainly including the guide layer and the support folding, in which the shell is installed, and then the central pipe is inserted into it. All parts of the large flow filter element are hot-melt welded without any adhesive, thus forming a complete integrated filter element without chemicals.

Large flow filter element has obvious advantages in the industry. It is different from ordinary water filter element. It has prominent technical advantages, its own filtration efficiency is relatively high, and it also has the characteristics of long service life and strong pollution capacity. The prominent filtration efficiency and strong pollution capacity make it have a broad application market. In the market and actual use, the pollution capacity of large flow filter element can reach about 15kg.

Previous: Factory directly supply High Flow PL-FB-TS Series PP filter cartridge for water

Next:

Cartridge Filter Water