High Flow PLSQ Series Pleated Filter Cartridge10-40 Inch 69mm Eco-Friendly PP Filter Cartridge Replacement For Water Treatment
|• High filtration area, high flow rate.|
|• With depth fine non-woven fabrics and scientific design, the filter has a good structure which has high dirt holding capacity, and result in long service life.|
|• 100% PP material makes the filter cartridge got excellent chemical compatibility. It is suitable for various liquid filtration.|
|Dimension:||[Removal Rating]: 0.5um,1um,3um,5um,10um,20um,50um,75um,100um|
|[Length]:20"(508mm), 40"(1016mm), 60"(1524mm)|
|[OD]: Ø 170mm|
|Material of Constructions:||[Media]: Polypropylene(PP)/Glass Fiber|
|[Drain layer]：China Non-Woven Fabric|
|[End cap]: Polypropylene(PP)|
|[Gasket]: Silicone, EPDM, NBR, Viton|
|Performance:||[Max. Operating temperature]: 80℃|
|[Max. Operating DP]: 4.0Bar@21℃,2.4Bar@80℃.|
|Series Number||Romoval Rating||Length||CORE||MEDIA||SEAL||OD|
Replacement method of pre tertiary filter element:
Water usually overflows during this process. Please prepare cleaning appliances such as water basin or towel:
a) Turn off the electroplating ball valve and pressure barrel ball valve;
b) Open the gooseneck faucet to drain the residual water in the pipeline;
c) When the water no longer flows out, open the filter housing with filter element with filter housing wrench;
d) Take out the old high flow filter element and install a new filter element of the same specification;
e) Coat the black "O" ring above the filter housing with lubricant, and then put the "O" ring into the groove in the filter housing.
f) Tighten the filter housing vertically to avoid the displacement of the "O" ring.
g) Open the electroplating ball valve and pressure barrel ball valve.
◆ allow high flow media to pass through the filter material, which has the advantages of high efficiency, low pressure loss and long service life.
◆ the external inlet and internal outlet structure of the large flow filter element makes it easy to replace the filter element and keep the pollutants intercepted outside the filter element.
◆ there is a PP support framework inside the filter element, which can withstand a maximum pressure difference of 0.245Mpa.
◆ of filter element β The value is more than 1000.
◆ multiple filter elements can be installed in the filter shell, which can be used in a wide flow range, whether starting or continuous operation.
◆ the filter element is durable and can be equipped with the least and most economical filter.