PP melt blown P series drinking water filter cartridge with nsf certification length 10 inch size customized for water filtration system

Short Description:

Melt Blown P Series is fusing and intertwined of polypropylene resin without any chemical glues.The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong pollutants holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.The hairy surface increases the resistance to the liquid flow, which makes the filters has better dirt holding capacity.


Product Detail

Product Tags

Product characteristics:
•  Three-zone structure cartridge offers high dirt holding capacity and longer service life
•  Formed by thermal bond without using binders or adhesives
•  100% pure polypropylene will not contaminate the treated liquid, wide chemical compatibility
•  Grooving design to extend the filtration surface area.
•  FDA compliant material
•  All common adaptors are available.
Product specification:
Dimension: [Removal Rating]: 1um,5um,10um,20um,25um,50um,75um,100um,150um
[Length]: 5"(127mm),9.84"(250mm), 10"(254mm), 20"(508mm), 30"(762mm), 40"(1016mm),50"(1270mm), 60"(1524mm)
[OD]: Ø 60mm, 62mm, 114mm
[ID]: Ø 28mm, 30mm, 32mm, 34mm, 36mm, 38mm
Material of Constructions: [Media]: Polypropylene(PP)
[End cap]: Polypropylene(PP)
[Seal/Gasket]: Silicone, EPDM, NBR, Viton
[Core]:  Polypropylene(PP)
Performance: [Max. Operating temperature]: 65℃
[Max. Operating DP]: 2.0Bar@21℃
Order Information
Series Number Romoval Rating Length CORE END CAP SEAL/GASKET ID OD
FWMBG 1um=1 5"(127mm)=5 NON=N NON=N SILICONE=S 28mm 60mm
5um=5 9.84"(250mm)=984 PP=P DOE=DOE EPDM=E 30mm 62mm
10um=10 10"(254mm)=10 222 CLOSE=S2C NBR=N 32mm 114mm
20um=20 20"(508mm)=20 222   FIN=S2F VITON=V 34mm
25um=25 30"(762mm)=30 226 CLOSE=S6C 36mm
50um=50 40"(1016mm)=40 226   FIN=S6F 38mm
75um=75 50"(1270mm)=50 110mm
100um=100 60"(1524mm)=60
150um=150
For Example: FWMBG-1-10-N-DOE-S-28/62
FWMBG-1-20-N-S2C-S-28/114

 

It is not only used in large quantities in water purification It also has excellent chemical compatibility and is suitable for the filtration of strong acids, bases and organic solvents. The utility model has the advantages of strong pollution holding capacity, long service life and low cost

PP melt blown filter element is made of polypropylene as raw material. Through the latest melt blown, traction and receiving technology, polypropylene fibers are entangled with each other by self-adhesive to form a three-dimensional curved diameter microporous structure. It is different from the fiber distribution in traditional fabrics and combed non-woven fabrics. It has larger specific surface area, higher porosity and finer pore diameter. Its excellent filtration performance is higher than that of other ordinary filter materials. Because the fiber diameter and density change controllably in the diameter direction of the filter element, the finished filter element will form a multi-layer gradient structure from dense inside to loose outside.

1. High filtration precision, large filtration flow, low pressure and stable efficiency;

2. Melting and self bonding between fibers, melting and bonding between multi-layer structural layers, no delamination and falling off, with good rigidity and microporous stability;

3. The filtering accuracy is controlled stably, and the filter element can be used scientifically according to different filtering requirements.

Pre filtration of drinking water;

R. O pre filtration treatment of infiltration;

Pre filtration treatment of sterile water and purified water for pharmaceutical use;

Pre filtration in beverage and wine making;

Pre filtration in edible oil manufacturing;

Filtration of all kinds of slurry;

Filtration of chemical raw materials and organic solvents; Filtration in the manufacture of strong glue, latex and ordinary glue;

Filtering of mechanical oil and cutting oil; Filtration of PCB solution;

Electro coating (ED) and filtration of chemical solution;

Filtration of industrial water, electronics and electroplating solution;

Pre filtration of swimming pool clean water treatment;

Filtration of imaging drug solution and ink.


  • Previous:
  • Next: