PriceList for Pool Filter Cartridge - PP melt blown drinking water filter cartridge D Series nsf certification length inch size customized for water filtration system – Wuhu
PriceList for Pool Filter Cartridge - PP melt blown drinking water filter cartridge D Series nsf certification length inch size customized for water filtration system – Wuhu Detail:
Product characteristics: | |||||||
• Three-zone structure cartridge offers high dirt holding capacity and longer service life | |||||||
• Formed by thermal bond without using binders or adhesives | |||||||
• 100% pure polypropylene will not contaminate the treated liquid, wide chemical compatibility | |||||||
• Deepth Dot design to extend the filtration surface area. | |||||||
• FDA compliant material | |||||||
• All common adaptors are available. | |||||||
Product specification: | |||||||
Dimension: | [Removal Rating]: 1um,5um,10um,20um,25um,50um,75um,100um,150um | ||||||
[Length]: 5″(127mm),9.84″(250mm), 10″(254mm), 20″(508mm), 30″(762mm), 40″(1016mm),50″(1270mm), 60″(1524mm) | |||||||
[OD]: Ø 60mm, 62mm, 114mm | |||||||
[ID]: Ø 28mm, 30mm, 32mm, 34mm, 36mm, 38mm | |||||||
Material of Constructions: | [Media]: Polypropylene(PP) | ||||||
[End cap]: Polypropylene(PP) | |||||||
[Seal/Gasket]: Silicone, EPDM, NBR, Viton | |||||||
[Core]: Polypropylene(PP) | |||||||
Performance: | [Max. Operating temperature]: 65℃ | ||||||
[Max. Operating DP]: 2.0Bar@21℃ | |||||||
Order Information | |||||||
Series Number | Romoval Rating | Length | CORE | END CAP | SEAL/GASKET | ID | OD |
FWMBD | 1um=1 | 5″(127mm)=5 | NON=N | NON=N | SILICONE=S | 28mm | 60mm |
5um=5 | 9.84″(250mm)=984 | PP=P | DOE=DOE | EPDM=E | 30mm | 62mm | |
10um=10 | 10″(254mm)=10 | 222 CLOSE=S2C | NBR=N | 32mm | 114mm | ||
20um=20 | 20″(508mm)=20 | 222 FIN=S2F | VITON=V | 34mm | |||
25um=25 | 30″(762mm)=30 | 226 CLOSE=S6C | 36mm | ||||
50um=50 | 40″(1016mm)=40 | 226 FIN=S6F | 38mm | ||||
75um=75 | 50″(1270mm)=50 | 110mm | |||||
100um=100 | 60″(1524mm)=60 | ||||||
150um=150 | |||||||
For Example: | FWMBD-1-10-N-DOE-S-28/62 | ||||||
FWMBD-1-20-N-S2C-S-28/114 |
The structure of PP melt blown filter element is a gradual diameter tightening structure with coarse outer fiber, fine inner fiber, loose outer layer and tight inner layer. The unique gradient deep filtration forms a three-dimensional slag filtering effect, which has the characteristics of high porosity, high interception rate, large pollutant carrying capacity, large flow and low pressure drop.
All thermoplastic (high temperature melting and low temperature curing) polymer chip raw materials can be used in the manufacturing process of melt blown filter element. Polypropylene is one of the most widely used slicing materials in melt blown process. In addition, the commonly used polymer slicing materials in melt blown process include polyester, polyamide, polyethylene, polytetrafluoroethylene, polystyrene, PBT, EMA, EVA, etc. Olefin polymer raw materials (such as polypropylene) have a high degree of polymerization, so the heating temperature is higher than its melting point. It can melt and spray smoothly above 100 ℃, while polyester can melt and spray slightly higher than its melting point. Olefin raw materials generally do not need to be dried.
The structural feature of PP melt blown filter element is that the fiber fineness is relatively small, usually less than 10 microns, and most of the fiber fineness is between 1 ~ 4 microns.
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of team building, attempting hard to boost the standard and liability consciousness of personnel customers. Our corporation successfully attained IS9001 Certification and European CE Certification of PriceList for Pool Filter Cartridge - PP melt blown drinking water filter cartridge D Series nsf certification length inch size customized for water filtration system – Wuhu , The product will supply to all over the world, such as: Rwanda, Norwegian, Brazil, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By Marguerite from Provence - 2018.09.12 17:18
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Mary from Netherlands - 2017.11.29 11:09