Short Lead Time for melt filter manufacturer - PP melt blown P series drinking water filter cartridge with nsf certification length 10 inch size customized for water filtration system – Wuhu
Short Lead Time for melt filter manufacturer - PP melt blown P series drinking water filter cartridge with nsf certification length 10 inch size customized for water filtration system – Wuhu Detail:
Product characteristics: | |||||||
• Three-zone structure cartridge offers high dirt holding capacity and longer service life | |||||||
• Formed by thermal bond without using binders or adhesives | |||||||
• 100% pure polypropylene will not contaminate the treated liquid, wide chemical compatibility | |||||||
• Grooving design to extend the filtration surface area. | |||||||
• FDA compliant material | |||||||
• All common adaptors are available. | |||||||
Product specification: | |||||||
Dimension: | [Removal Rating]: 1um,5um,10um,20um,25um,50um,75um,100um,150um | ||||||
[Length]: 5″(127mm),9.84″(250mm), 10″(254mm), 20″(508mm), 30″(762mm), 40″(1016mm),50″(1270mm), 60″(1524mm) | |||||||
[OD]: Ø 60mm, 62mm, 114mm | |||||||
[ID]: Ø 28mm, 30mm, 32mm, 34mm, 36mm, 38mm | |||||||
Material of Constructions: | [Media]: Polypropylene(PP) | ||||||
[End cap]: Polypropylene(PP) | |||||||
[Seal/Gasket]: Silicone, EPDM, NBR, Viton | |||||||
[Core]: Polypropylene(PP) | |||||||
Performance: | [Max. Operating temperature]: 65℃ | ||||||
[Max. Operating DP]: 2.0Bar@21℃ | |||||||
Order Information | |||||||
Series Number | Romoval Rating | Length | CORE | END CAP | SEAL/GASKET | ID | OD |
FWMBG | 1um=1 | 5″(127mm)=5 | NON=N | NON=N | SILICONE=S | 28mm | 60mm |
5um=5 | 9.84″(250mm)=984 | PP=P | DOE=DOE | EPDM=E | 30mm | 62mm | |
10um=10 | 10″(254mm)=10 | 222 CLOSE=S2C | NBR=N | 32mm | 114mm | ||
20um=20 | 20″(508mm)=20 | 222 FIN=S2F | VITON=V | 34mm | |||
25um=25 | 30″(762mm)=30 | 226 CLOSE=S6C | 36mm | ||||
50um=50 | 40″(1016mm)=40 | 226 FIN=S6F | 38mm | ||||
75um=75 | 50″(1270mm)=50 | 110mm | |||||
100um=100 | 60″(1524mm)=60 | ||||||
150um=150 | |||||||
For Example: | FWMBG-1-10-N-DOE-S-28/62 | ||||||
FWMBG-1-20-N-S2C-S-28/114 |
It is not only used in large quantities in water purification It also has excellent chemical compatibility and is suitable for the filtration of strong acids, bases and organic solvents. The utility model has the advantages of strong pollution holding capacity, long service life and low cost
PP melt blown filter element is made of polypropylene as raw material. Through the latest melt blown, traction and receiving technology, polypropylene fibers are entangled with each other by self-adhesive to form a three-dimensional curved diameter microporous structure. It is different from the fiber distribution in traditional fabrics and combed non-woven fabrics. It has larger specific surface area, higher porosity and finer pore diameter. Its excellent filtration performance is higher than that of other ordinary filter materials. Because the fiber diameter and density change controllably in the diameter direction of the filter element, the finished filter element will form a multi-layer gradient structure from dense inside to loose outside.
1. High filtration precision, large filtration flow, low pressure and stable efficiency;
2. Melting and self bonding between fibers, melting and bonding between multi-layer structural layers, no delamination and falling off, with good rigidity and microporous stability;
3. The filtering accuracy is controlled stably, and the filter element can be used scientifically according to different filtering requirements.
Pre filtration of drinking water;
R. O pre filtration treatment of infiltration;
Pre filtration treatment of sterile water and purified water for pharmaceutical use;
Pre filtration in beverage and wine making;
Pre filtration in edible oil manufacturing;
Filtration of all kinds of slurry;
Filtration of chemical raw materials and organic solvents; Filtration in the manufacture of strong glue, latex and ordinary glue;
Filtering of mechanical oil and cutting oil; Filtration of PCB solution;
Electro coating (ED) and filtration of chemical solution;
Filtration of industrial water, electronics and electroplating solution;
Pre filtration of swimming pool clean water treatment;
Filtration of imaging drug solution and ink.
Product detail pictures:
Related Product Guide:
Our team through professional training. Skilled professional knowledge, strong sense of service, to meet the service needs of customers for Short Lead Time for melt filter manufacturer - PP melt blown P series drinking water filter cartridge with nsf certification length 10 inch size customized for water filtration system – Wuhu , The product will supply to all over the world, such as: Macedonia, United Arab emirates, Southampton, They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to for you of fantastic good quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We are confident that we are going to have a bright prospect and to be distributed all over the world in the years to come.
By Cherry from Romania - 2018.03.03 13:09
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Gemma from Hongkong - 2018.02.04 14:13