Good Quality cartridge filter size - PP melt blown drinking water filter cartridge D Series nsf certification length inch size customized for water filtration system – Wuhu

Short Description:

Product Detail

Product Tags

Feedback (2)

"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our corporation to the long-term to establish collectively with customers for mutual reciprocity and mutual benefit for Stainless Steel Filter Manufacturers, Oil And Gas Filtration, Oil Bag, Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now.

Good Quality cartridge filter size - PP melt blown drinking water filter cartridge D Series nsf certification length inch size customized for water filtration system – Wuhu Detail:

Product characteristics:
• Three-zone structure cartridge offers high dirt holding capacity and longer service life
• Formed by thermal bond without using binders or adhesives
• 100% pure polypropylene will not contaminate the treated liquid, wide chemical compatibility
• Deepth Dot design to extend the filtration surface area.
• FDA compliant material
• All common adaptors are available.

Product specification:
Dimension:		[Removal Rating]: 1um,5um,10um,20um,25um,50um,75um,100um,150um
		[Length]: 5″(127mm),9.84″(250mm), 10″(254mm), 20″(508mm), 30″(762mm), 40″(1016mm),50″(1270mm), 60″(1524mm)
		[OD]: Ø 60mm, 62mm, 114mm
		[ID]: Ø 28mm, 30mm, 32mm, 34mm, 36mm, 38mm
Material of Constructions:		[Media]: Polypropylene(PP)
		[End cap]: Polypropylene(PP)
		[Seal/Gasket]: Silicone, EPDM, NBR, Viton
		[Core]: Polypropylene(PP)
Performance:		[Max. Operating temperature]: 65℃
Performance:		[Max. Operating DP]: 2.0Bar@21℃

Order Information
Series Number	Romoval Rating	Length	CORE	END CAP	SEAL/GASKET	ID	OD
FWMBD	1um=1	5″(127mm)=5	NON=N	NON=N	SILICONE=S	28mm	60mm
	5um=5	9.84″(250mm)=984	PP=P	DOE=DOE	EPDM=E	30mm	62mm
	10um=10	10″(254mm)=10		222 CLOSE=S2C	NBR=N	32mm	114mm
	20um=20	20″(508mm)=20		222 FIN=S2F	VITON=V	34mm
	25um=25	30″(762mm)=30		226 CLOSE=S6C		36mm
	50um=50	40″(1016mm)=40		226 FIN=S6F		38mm
	75um=75	50″(1270mm)=50				110mm
	100um=100	60″(1524mm)=60
	150um=150
For Example:	FWMBD-1-10-N-DOE-S-28/62
For Example:	FWMBD-1-20-N-S2C-S-28/114

The structure of PP melt blown filter element is a gradual diameter tightening structure with coarse outer fiber, fine inner fiber, loose outer layer and tight inner layer. The unique gradient deep filtration forms a three-dimensional slag filtering effect, which has the characteristics of high porosity, high interception rate, large pollutant carrying capacity, large flow and low pressure drop.

All thermoplastic (high temperature melting and low temperature curing) polymer chip raw materials can be used in the manufacturing process of melt blown filter element. Polypropylene is one of the most widely used slicing materials in melt blown process. In addition, the commonly used polymer slicing materials in melt blown process include polyester, polyamide, polyethylene, polytetrafluoroethylene, polystyrene, PBT, EMA, EVA, etc. Olefin polymer raw materials (such as polypropylene) have a high degree of polymerization, so the heating temperature is higher than its melting point. It can melt and spray smoothly above 100 ℃, while polyester can melt and spray slightly higher than its melting point. Olefin raw materials generally do not need to be dried.

The structural feature of PP melt blown filter element is that the fiber fineness is relatively small, usually less than 10 microns, and most of the fiber fineness is between 1 ~ 4 microns.

Product detail pictures:

Related Product Guide:

Quality First,and Customer Supreme is our guideline to provide the best service to our customers.Nowadays, we are trying our best to become one of the best exporters in our field to meet customers more need for Good Quality cartridge filter size - PP melt blown drinking water filter cartridge D Series nsf certification length inch size customized for water filtration system – Wuhu , The product will supply to all over the world, such as: Bulgaria, French, Mali, With the effort to keep pace with world's trend, we'll always endeavor to meet customers' demands. If you want develop any other new items, we can customize them to suit your needs. If you feel interest in any of our products and solutions or want develop new merchandise, you should feel free to contact us. We are looking forward to forming successful business relationship with customers all over the world.

Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!