Factory Price Polypropylene Pleated Filter Cartridge PP Series Membrane Filter Water Filter

Short Description:

Pleated Membrane PP Series Filter Cartridges is constructed of high performance polypropylene filter media that got technological breakthrough type sub-micro level. The pores of the material are uniformly distributed. The construction is designed scientifically which makes the filter cartridge got high flow rate. This allows users can filter the particles in liquid quickly and efficiently and save the cost.

Send email to us

Product Detail

Product Tags

Product characteristics:
• High performance polypropylene filter media that got technological breakthrough type sub-micro level makes filter cartridge have excellent performance.
• High performance media with scientifically design makes filter cartridge have fast and high flow rate.
• High efficiency filter media combined with the characteristics of scientific structural design makes the filter has a high dirt holding capacity which result in a long service life.
• High efficiency filter combined with the characteristics of scientific structural design makes the filter with absolute precision filtration efficiency
• 100% PP material makes the filter cartridge got excellent chemical compatibility. It is suitable for various liquid filtration.

Product specification:
Dimension:		[Removal Rating]: 0.1um,0.22um,0.45um,1um,3um,5um,10um,20um,50um
		[Length]: 5"(127mm),9.87"(250mm), 10"(254mm), 20"(508mm), 30"(762mm), 40"(1016mm)
		[OD]: Ø 60mm，65mm，68mm
Material of Constructions:		[Media]: Polypropylene(PP)
		[Drain layer]：Non-Woven Fabric (China or USA)
		[End cap]: Polypropylene(PP)
		[Seal/Gasket]: Silicone, EPDM, NBR, Viton
		[Core]: Polypropylene(PP)，Stainless Steel(SUS)
Performance:		[Max. Operating temperature]: 80℃
		[Max. Operating DP]: 4.0Bar@21℃,2.4Bar@80℃.

Order Information
Series Number	Romoval Rating	Length	CORE	END CAP	SEAL/GASKET	OD
FWPMPP	0.1um=01	5"(127mm)=5	PP=P	DOE=DOE	SILICONE=S	60mm
	0.22um=022	10"(254mm)=10	SUS=S	222 CLOSE=S2C	EPDM=E	65mm
	0.45um=045	20"(508mm)=20		222 FIN=S2F	NBR=N	68mm
	1um=1	30"(762mm)=30		226 CLOSE=S6C	VITON=V
	3um=3	40"(1016mm)=40		226 FIN=S6F
For Example:	FWPMPP-1-10-P-DOE-S
	FWPMPP-1-20-P-S2C-S

The main filter materials of microporous folding filter element include: stainless steel mesh, sintered mesh, polypropylene, hydrophobic polytetrafluoroethylene, hydrophilic polytetrafluoroethylene, polyethersulfone, nylon, etc.

The main characteristics of microporous membrane folding filter element: high rejection rate, high flow flux, low pressure difference and wide chemical compatibility; The production process adopts unique hot-melt welding processing technology, without any adhesive and foreign matter release. Meet the production requirements of food, beverage, beer, chemical industry, pharmaceutical and other industries.

Polypropylene composite filter membrane is used as the main filter material. This kind of filter element is an advanced fixed deep filter element, and the nominal filtration accuracy can range from 0.1 μ M to 60 μ m。 The filter membrane is not affected by the fluctuation of feed pressure. Its unique low pressure difference, high throughput, good filtration accuracy and low economic cost are deeply loved by the majority of users.

Product features of folding filter element
⊙ relative filtration accuracy, interception rate of more than 90%
⊙ wide chemical compatibility, large flow and low pressure difference
⊙ no medium falling off, meeting the pharmaceutical industry standards.
⊙ wide range of filtering accuracy, which can meet various application requirements
⊙ it is welded by hot-melt process, which is firm and free of release pollution.
⊙ chemical method and online steam sterilization can be used.
⊙ it can be cleaned and regenerated, which is economical.