PTOB Series Polypropylene Pleated Filter Cartridge PP Membrane Filter Replacement for Water Filter

Short Description:

Pleated Membrane PTOB Series filter cartridge is constructed of hydrophobic PTFE membrane which has excellent chemical compatibility and corrosion resistance.This filter cartridge is suitable for the filtration to liquids and gases with strongly aggressive and oxidative.

Send email to us

Product Detail

Product Tags

Product characteristics:
• PTFE membrane got excellent chemical compatibility.It has good tolerance to various chemical and can be used for filtering kinds of corrosive liquids and gases.
• PTFE membrane provide high filtration efficiency with absolute micron rating make sure to reduce the particals.
• 100% integrity tested

Product specification:
Dimension:		[Removal Rating]: 0.1um,0.22um,0.45um,1um
		[Length]: 5"(127mm),9.87"(250mm), 10"(254mm), 20"(508mm), 30"(762mm), 40"(1016mm)
		[OD]: Ø 60mm，65mm，68mm
Material of Constructions:		[Media]: Hydropobic PTFE Membrane
		[Drain layer]：Non-Woven Fabric of DuPont, USA
		[End cap]: Polypropylene(PP)
		[Seal/Gasket]: Silicone, EPDM, NBR, Viton
		[Core]: Polypropylene(PP)，Stainless Steel(SUS)
Performance:		[Max. Operating temperature]: 80℃
		[Max. Operating DP]: 4.0Bar@21℃,2.4Bar@80℃.

Order Information
Series Number	Romoval Rating	Length	CORE	END CAP	SEAL/GASKET	OD
FWPMPTOB	0.1um=01	5"(127mm)=5	PP=P	DOE=DOE	SILICONE=S	60mm
	0.22um=022	10"(254mm)=10	SUS=S	222 CLOSE=S2C	EPDM=E	65mm
	0.45um=045	20"(508mm)=20		222 FIN=S2F	NBR=N	68mm
	1um=1	30"(762mm)=30		226 CLOSE=S6C	VITON=V
		40"(1016mm)=40		226 FIN=S6F
For Example:	FWPMPTOB-01-10-S-DOE-S
	FWPMPTOB-01-20-S-S2C-S

The main characteristics of microporous membrane folding filter element: high rejection rate, high flow flux, low pressure difference and wide chemical compatibility; The production process adopts unique hot-melt welding processing technology, without any adhesive and foreign matter release. Meet the production requirements of food, beverage, beer, chemical industry, pharmaceutical and other industries.

Polypropylene composite filter membrane is used as the main filter material. This kind of filter element is an advanced fixed deep filter element, and the nominal filtration accuracy can range from 0.1 μ M to 60 μ m。 The filter membrane is not affected by the fluctuation of feed pressure. Its unique low pressure difference, high throughput, good filtration accuracy and low economic cost are deeply loved by the majority of users.

Product features of folding filter element
⊙ relative filtration accuracy, interception rate of more than 90%
⊙ wide chemical compatibility, large flow and low pressure difference
⊙ no medium falling off, meeting the pharmaceutical industry standards.
⊙ wide range of filtering accuracy, which can meet various application requirements
⊙ it is welded by hot-melt process, which is firm and free of release pollution.
⊙ chemical method and online steam sterilization can be used.
⊙ it can be cleaned and regenerated, which is economical.

Typical application of folding filter element
⊙ reverse osmosis water system and pre filtration of deionized water system.
⊙ filtration of beverages, alcohol, mineral water, purified water, edible oil, etc
⊙ filter chemical solvents, fine chemicals, ink, etc.
⊙ liquid medicine, medicament and medicament shall be filtered with water.
⊙ others: biological products, plasma, oilfield reinjection water, gas filtration, etc.

Previous: Pleated Membrane Cartridge Filter Pleated Cartridge Filter Cartridge PTIL Series

Next: Pleated Polypropylene Membrane PES Series Membrane Water Filter Cartridge 0.2 Micron

Pleated Cartridge Filter Manufacturer