High definition blowing on the cartridge - PP melt blown drinking water filter cartridge D Series nsf certification length inch size customized for water filtration system – Wuhu
High definition blowing on the cartridge - PP melt blown drinking water filter cartridge D Series nsf certification length inch size customized for water filtration system – Wuhu Detail:
Product characteristics: | |||||||
• Three-zone structure cartridge offers high dirt holding capacity and longer service life | |||||||
• Formed by thermal bond without using binders or adhesives | |||||||
• 100% pure polypropylene will not contaminate the treated liquid, wide chemical compatibility | |||||||
• Deepth Dot design to extend the filtration surface area. | |||||||
• FDA compliant material | |||||||
• All common adaptors are available. | |||||||
Product specification: | |||||||
Dimension: | [Removal Rating]: 1um,5um,10um,20um,25um,50um,75um,100um,150um | ||||||
[Length]: 5″(127mm),9.84″(250mm), 10″(254mm), 20″(508mm), 30″(762mm), 40″(1016mm),50″(1270mm), 60″(1524mm) | |||||||
[OD]: Ø 60mm, 62mm, 114mm | |||||||
[ID]: Ø 28mm, 30mm, 32mm, 34mm, 36mm, 38mm | |||||||
Material of Constructions: | [Media]: Polypropylene(PP) | ||||||
[End cap]: Polypropylene(PP) | |||||||
[Seal/Gasket]: Silicone, EPDM, NBR, Viton | |||||||
[Core]: Polypropylene(PP) | |||||||
Performance: | [Max. Operating temperature]: 65℃ | ||||||
[Max. Operating DP]: 2.0Bar@21℃ | |||||||
Order Information | |||||||
Series Number | Romoval Rating | Length | CORE | END CAP | SEAL/GASKET | ID | OD |
FWMBD | 1um=1 | 5″(127mm)=5 | NON=N | NON=N | SILICONE=S | 28mm | 60mm |
5um=5 | 9.84″(250mm)=984 | PP=P | DOE=DOE | EPDM=E | 30mm | 62mm | |
10um=10 | 10″(254mm)=10 | 222 CLOSE=S2C | NBR=N | 32mm | 114mm | ||
20um=20 | 20″(508mm)=20 | 222 FIN=S2F | VITON=V | 34mm | |||
25um=25 | 30″(762mm)=30 | 226 CLOSE=S6C | 36mm | ||||
50um=50 | 40″(1016mm)=40 | 226 FIN=S6F | 38mm | ||||
75um=75 | 50″(1270mm)=50 | 110mm | |||||
100um=100 | 60″(1524mm)=60 | ||||||
150um=150 | |||||||
For Example: | FWMBD-1-10-N-DOE-S-28/62 | ||||||
FWMBD-1-20-N-S2C-S-28/114 |
The structure of PP melt blown filter element is a gradual diameter tightening structure with coarse outer fiber, fine inner fiber, loose outer layer and tight inner layer. The unique gradient deep filtration forms a three-dimensional slag filtering effect, which has the characteristics of high porosity, high interception rate, large pollutant carrying capacity, large flow and low pressure drop.
All thermoplastic (high temperature melting and low temperature curing) polymer chip raw materials can be used in the manufacturing process of melt blown filter element. Polypropylene is one of the most widely used slicing materials in melt blown process. In addition, the commonly used polymer slicing materials in melt blown process include polyester, polyamide, polyethylene, polytetrafluoroethylene, polystyrene, PBT, EMA, EVA, etc. Olefin polymer raw materials (such as polypropylene) have a high degree of polymerization, so the heating temperature is higher than its melting point. It can melt and spray smoothly above 100 ℃, while polyester can melt and spray slightly higher than its melting point. Olefin raw materials generally do not need to be dried.
The structural feature of PP melt blown filter element is that the fiber fineness is relatively small, usually less than 10 microns, and most of the fiber fineness is between 1 ~ 4 microns.
Product detail pictures:
Related Product Guide:
We enjoy a very good reputation among our customers for our excellent product quality, competitive price and the best service for High definition blowing on the cartridge - PP melt blown drinking water filter cartridge D Series nsf certification length inch size customized for water filtration system – Wuhu , The product will supply to all over the world, such as: Bangalore, Morocco, Kenya, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part solutions. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.
By Hazel from Algeria - 2017.06.22 12:49
Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
By Cara from Romania - 2017.11.01 17:04