Original Factory stainless steel filter cartridge factory - PP melt blown P series drinking water filter cartridge with nsf certification length 10 inch size customized for water filtration system – Wuhu

Short Description:

Product Detail

Product Tags

Feedback (2)

It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for How Do Filters Work, Membrane Filter Cartridge, Absolute Filter Cartridge, With a wide range, good quality, reasonable prices and stylish designs,Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.

Original Factory stainless steel filter cartridge factory - PP melt blown P series drinking water filter cartridge with nsf certification length 10 inch size customized for water filtration system – Wuhu Detail:

Product characteristics:
• Three-zone structure cartridge offers high dirt holding capacity and longer service life
• Formed by thermal bond without using binders or adhesives
• 100% pure polypropylene will not contaminate the treated liquid, wide chemical compatibility
• Grooving design to extend the filtration surface area.
• FDA compliant material
• All common adaptors are available.

Product specification:
Dimension:		[Removal Rating]: 1um,5um,10um,20um,25um,50um,75um,100um,150um
		[Length]: 5″(127mm),9.84″(250mm), 10″(254mm), 20″(508mm), 30″(762mm), 40″(1016mm),50″(1270mm), 60″(1524mm)
		[OD]: Ø 60mm, 62mm, 114mm
		[ID]: Ø 28mm, 30mm, 32mm, 34mm, 36mm, 38mm
Material of Constructions:		[Media]: Polypropylene(PP)
		[End cap]: Polypropylene(PP)
		[Seal/Gasket]: Silicone, EPDM, NBR, Viton
		[Core]: Polypropylene(PP)
Performance:		[Max. Operating temperature]: 65℃
Performance:		[Max. Operating DP]: 2.0Bar@21℃

Order Information
Series Number	Romoval Rating	Length	CORE	END CAP	SEAL/GASKET	ID	OD
FWMBG	1um=1	5″(127mm)=5	NON=N	NON=N	SILICONE=S	28mm	60mm
	5um=5	9.84″(250mm)=984	PP=P	DOE=DOE	EPDM=E	30mm	62mm
	10um=10	10″(254mm)=10		222 CLOSE=S2C	NBR=N	32mm	114mm
	20um=20	20″(508mm)=20		222 FIN=S2F	VITON=V	34mm
	25um=25	30″(762mm)=30		226 CLOSE=S6C		36mm
	50um=50	40″(1016mm)=40		226 FIN=S6F		38mm
	75um=75	50″(1270mm)=50				110mm
	100um=100	60″(1524mm)=60
	150um=150
For Example:	FWMBG-1-10-N-DOE-S-28/62
For Example:	FWMBG-1-20-N-S2C-S-28/114

It is not only used in large quantities in water purification It also has excellent chemical compatibility and is suitable for the filtration of strong acids, bases and organic solvents. The utility model has the advantages of strong pollution holding capacity, long service life and low cost

PP melt blown filter element is made of polypropylene as raw material. Through the latest melt blown, traction and receiving technology, polypropylene fibers are entangled with each other by self-adhesive to form a three-dimensional curved diameter microporous structure. It is different from the fiber distribution in traditional fabrics and combed non-woven fabrics. It has larger specific surface area, higher porosity and finer pore diameter. Its excellent filtration performance is higher than that of other ordinary filter materials. Because the fiber diameter and density change controllably in the diameter direction of the filter element, the finished filter element will form a multi-layer gradient structure from dense inside to loose outside.

1. High filtration precision, large filtration flow, low pressure and stable efficiency;

2. Melting and self bonding between fibers, melting and bonding between multi-layer structural layers, no delamination and falling off, with good rigidity and microporous stability;

3. The filtering accuracy is controlled stably, and the filter element can be used scientifically according to different filtering requirements.

Pre filtration of drinking water;

R. O pre filtration treatment of infiltration;

Pre filtration treatment of sterile water and purified water for pharmaceutical use;

Pre filtration in beverage and wine making;

Pre filtration in edible oil manufacturing;

Filtration of all kinds of slurry;

Filtration of chemical raw materials and organic solvents; Filtration in the manufacture of strong glue, latex and ordinary glue;

Filtering of mechanical oil and cutting oil; Filtration of PCB solution;

Electro coating (ED) and filtration of chemical solution;

Filtration of industrial water, electronics and electroplating solution;

Pre filtration of swimming pool clean water treatment;

Filtration of imaging drug solution and ink.

Product detail pictures:

Related Product Guide:

We also provide item sourcing and flight consolidation solutions. We have now our very own manufacturing facility and sourcing place of work. We could provide you with nearly every kind of merchandise associated to our merchandise variety for Original Factory stainless steel filter cartridge factory - PP melt blown P series drinking water filter cartridge with nsf certification length 10 inch size customized for water filtration system – Wuhu , The product will supply to all over the world, such as: Algeria, Roman, Latvia, Our company always concentrate on the development of the international market. We've got a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.

In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.