Top Suppliers cartridge filter in water treatment - PP melt blown drinking water filter cartridge D Series nsf certification length inch size customized for water filtration system – Wuhu
Top Suppliers cartridge filter in water treatment - PP melt blown drinking water filter cartridge D Series nsf certification length inch size customized for water filtration system – Wuhu Detail:
Product characteristics: | |||||||
• Three-zone structure cartridge offers high dirt holding capacity and longer service life | |||||||
• Formed by thermal bond without using binders or adhesives | |||||||
• 100% pure polypropylene will not contaminate the treated liquid, wide chemical compatibility | |||||||
• Deepth Dot design to extend the filtration surface area. | |||||||
• FDA compliant material | |||||||
• All common adaptors are available. | |||||||
Product specification: | |||||||
Dimension: | [Removal Rating]: 1um,5um,10um,20um,25um,50um,75um,100um,150um | ||||||
[Length]: 5″(127mm),9.84″(250mm), 10″(254mm), 20″(508mm), 30″(762mm), 40″(1016mm),50″(1270mm), 60″(1524mm) | |||||||
[OD]: Ø 60mm, 62mm, 114mm | |||||||
[ID]: Ø 28mm, 30mm, 32mm, 34mm, 36mm, 38mm | |||||||
Material of Constructions: | [Media]: Polypropylene(PP) | ||||||
[End cap]: Polypropylene(PP) | |||||||
[Seal/Gasket]: Silicone, EPDM, NBR, Viton | |||||||
[Core]: Polypropylene(PP) | |||||||
Performance: | [Max. Operating temperature]: 65℃ | ||||||
[Max. Operating DP]: 2.0Bar@21℃ | |||||||
Order Information | |||||||
Series Number | Romoval Rating | Length | CORE | END CAP | SEAL/GASKET | ID | OD |
FWMBD | 1um=1 | 5″(127mm)=5 | NON=N | NON=N | SILICONE=S | 28mm | 60mm |
5um=5 | 9.84″(250mm)=984 | PP=P | DOE=DOE | EPDM=E | 30mm | 62mm | |
10um=10 | 10″(254mm)=10 | 222 CLOSE=S2C | NBR=N | 32mm | 114mm | ||
20um=20 | 20″(508mm)=20 | 222 FIN=S2F | VITON=V | 34mm | |||
25um=25 | 30″(762mm)=30 | 226 CLOSE=S6C | 36mm | ||||
50um=50 | 40″(1016mm)=40 | 226 FIN=S6F | 38mm | ||||
75um=75 | 50″(1270mm)=50 | 110mm | |||||
100um=100 | 60″(1524mm)=60 | ||||||
150um=150 | |||||||
For Example: | FWMBD-1-10-N-DOE-S-28/62 | ||||||
FWMBD-1-20-N-S2C-S-28/114 |
The structure of PP melt blown filter element is a gradual diameter tightening structure with coarse outer fiber, fine inner fiber, loose outer layer and tight inner layer. The unique gradient deep filtration forms a three-dimensional slag filtering effect, which has the characteristics of high porosity, high interception rate, large pollutant carrying capacity, large flow and low pressure drop.
All thermoplastic (high temperature melting and low temperature curing) polymer chip raw materials can be used in the manufacturing process of melt blown filter element. Polypropylene is one of the most widely used slicing materials in melt blown process. In addition, the commonly used polymer slicing materials in melt blown process include polyester, polyamide, polyethylene, polytetrafluoroethylene, polystyrene, PBT, EMA, EVA, etc. Olefin polymer raw materials (such as polypropylene) have a high degree of polymerization, so the heating temperature is higher than its melting point. It can melt and spray smoothly above 100 ℃, while polyester can melt and spray slightly higher than its melting point. Olefin raw materials generally do not need to be dried.
The structural feature of PP melt blown filter element is that the fiber fineness is relatively small, usually less than 10 microns, and most of the fiber fineness is between 1 ~ 4 microns.
Product detail pictures:
Related Product Guide:
We stick with the theory of "quality first, company first, steady improvement and innovation to satisfy the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our provider, we deliver the items together with the fantastic good quality at the reasonable value for Top Suppliers cartridge filter in water treatment - PP melt blown drinking water filter cartridge D Series nsf certification length inch size customized for water filtration system – Wuhu , The product will supply to all over the world, such as: The Swiss, Serbia, Mauritius, We've been consistently broadening the market within Romania in addition to preparation punching in extra premium quality merchandise connected with printer on t shirt so that you can Romania. Most people firmly believe we've the whole capacity to provide you happy solutions.
By Mandy from Bangladesh - 2018.09.29 13:24
The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
By Colin Hazel from Lahore - 2018.06.26 19:27